PDA

View Full Version : Miraz JK



Miraz
09-11-09, 07:28 PM
http://www.miraz.com/gallery/d/11450-2/IMGP6747+2.jpg

2 dr JK CRD
ARB Bar + Rugged Ridge HID Spotties + TJM OX Winch
Rubicon Rock Rails
4" Lift
35" BFG KM2 on 17" Dick Cepek Torque Rims

More goodies to come...

marcus
10-11-09, 08:22 AM
Looking good mate

reyzor
10-11-09, 09:20 AM
nice!!!

sbadman
10-11-09, 10:05 AM
The JK looked pretty mean at the TJM open day with the lift, now it just look tough :D

Miraz
03-09-10, 02:07 PM
Next major change is a RockKrawler Long Arm Suspension Kit
AFAIK this is the first installation of one of these kits to a diesel JK, so there will be a few new problems to deal with along the way.
First problem is the installation of the control arm brackets - RK supply two hefty brackets that are bolted to the front of the transmission cross member and then welded to the frame rails - both the upper and lower front control arms attach to these brackets.
This creates a few problems:-
- The LHS bracket conflicts with the exhaust, so that needs to be modified
- The RHS bracket uses the space currently occupied by the fuel filter, so that needs to be moved.
- The bash plate that links the two brackets together doesn't provide enough clearance for the CRD exhaust where it crosses under the transmission.
RHS bracket bolted into place - exhaust system removed
http://www.miraz.com/gallery/d/14133-2/1000000097.JPG
LHS bracket bolted into place - exhaust system removed
http://www.miraz.com/gallery/d/14139-2/1000000095.JPG
Played about with a few options - decided to split the exhaust into two smaller pipes to run under the transmission sump.
http://www.miraz.com/gallery/d/14148-2/1000000104.JPG
Not quite sure that we've left enough clearance for the drive shaft on full droop, but won't be able to tell until the new shocks are on the front.
http://www.miraz.com/gallery/d/14151-2/1000000103.JPG
Still working on the fuel filter, suspect it will end up on the LHS firewall, under the battery tray.

Hunno
03-09-10, 06:43 PM
I like the thought of spliting the pipe into 2, thats using your nut.

Miraz
22-09-10, 08:32 PM
Still making slow progress - coilovers should go in later tonight....

Upper Arms in place, chassis rail prepped for coil over brackets
http://www.miraz.com/gallery/d/14216-1/IMG_0123.jpg

Other Side - note the new upper link mount, and that both upper arms are connected using rebuildable ball joints instead of bushes.
http://www.miraz.com/gallery/d/14219-1/IMG_0124.jpg

Better shot of the ball joint

http://www.miraz.com/gallery/d/14222-2/IMG_0125.jpg

Front Shocks

http://www.miraz.com/gallery/d/14155-1/IMG_0076.jpg

Miraz
17-01-11, 10:23 AM
It's taken a little while to sort out the bugs with the new suspension...the front end is now flexing properly, still a little more travel to come from the back end though.

http://farm6.static.flickr.com/5289/5359505670_96b7e6576c.jpg

Dieselcon
17-01-11, 08:49 PM
front end is now flexing properly,

http://farm6.static.flickr.com/5289/5359505670_96b7e6576c.jpg[/QUOTE]

Impressive - Great flex!!!
Great work I'm sure it was worth the wait

MOP44R
18-01-11, 09:10 AM
Had a chance to get it up a ramp yet..? Beat your old record...

Miraz
18-01-11, 03:28 PM
Not yet...will happen sometime soon though...

Miraz
12-08-11, 12:54 PM
New front axle turned up yesterday...should have 4wd back again in the next couple of weeks...

http://farm7.static.flickr.com/6146/6031217054_42e50b1b37.jpg
http://farm7.static.flickr.com/6187/6031218574_47ee16deed.jpg

MOP44R
16-08-11, 02:20 PM
Nice !!!!!!!!!!!!!!

aussiejk
17-08-11, 02:59 PM
New front axle turned up yesterday...should have 4wd back again in the next couple of weeks...

http://farm7.static.flickr.com/6146/6031217054_42e50b1b37.jpg
http://farm7.static.flickr.com/6187/6031218574_47ee16deed.jpg


can someone get a bucket to catch the drool from my mouth... that front diff is a serious piece...

Hunty
17-08-11, 03:58 PM
I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all I am not Jealous at all !

Miraz
24-08-11, 06:07 PM
New vs Old...

Hunno
24-08-11, 08:53 PM
Nice, hope we both can hit the track soon.

Miraz
25-08-11, 08:29 AM
Nice, hope we both can hit the track soon.

Would be good - it's been a while...

http://tapatalk.com/mu/c0947570-7b36-6107.jpg

Miraz
29-08-11, 08:33 AM
Update on progress...

Miraz
03-09-11, 08:26 AM
Reinforcing the front panhard bracket to handle the extra weight of the new front end....no more death wobbles!

http://farm7.static.flickr.com/6182/6107513052_139bcdafe4_z.jpg
http://farm7.static.flickr.com/6061/6107512958_d095a4ab1b_z.jpg
http://farm7.static.flickr.com/6182/6106965935_6a4e92a0b3_z.jpg

SteveC
03-09-11, 08:33 AM
Looks good - Are you handy with the welder ???

Miraz
03-09-11, 11:37 AM
My welding is embarrassing...I'd prefer to somebody more competent to tackle the safety critical stuff like this...

Miraz
05-09-11, 04:52 PM
Strut and bump mounts...

http://tapatalk.com/mu/3aa3afb3-71a4-f9d8.jpg

aussiejk
07-09-11, 01:52 PM
what was wrong with the rock krawler coilover set up?

Miraz
07-09-11, 02:14 PM
I want to try the ORI struts out....and the RK coilover mount doesn't have enough clearance to run them...and the new front axle is in a different location, so the RK mount was going to take some work anyway...

aussiejk
08-09-11, 04:45 PM
so what are your plans with the rock krawler mounts and coilovers? if your interested in selling them PM me...

cheers

Dave

Miraz
15-09-11, 09:21 PM
Came tantalizingly close to getting it on the road today.....having clearance issues with the brakes....the discs foul on the caliper, but are too big for the lathe...and the beadlock valves foul on the calipers too....


I saw driving in & out of Wooders

reyzor
16-09-11, 07:43 AM
dammit!................................

Miraz
16-09-11, 06:34 PM
It lives!

The hydro assist steering will take a little getting used to, but I'm loving the struts...corners absolutely flat

aussiejk
16-09-11, 07:34 PM
very nice very jealous....

SKIZZI
16-09-11, 10:42 PM
Well done!

37s look like 40s on the 2 door ;)

aussiejk
17-09-11, 12:09 PM
I rekon the 37s look small with the amount of lift or maybe also the flares that make it look big too

Miraz
19-10-11, 10:37 AM
Back from Cape York, and back to finishing the build up...now for the rear end stretch, the 14bolt is going back 8" which should give me a 104" wheel base


New axle position at ride height
http://farm7.static.flickr.com/6116/6258598173_ce2e29cfa5.jpg


Wheel position at ride height
http://farm7.static.flickr.com/6211/6259124134_ab1043ab21.jpg


Axle position at full stuff
http://farm7.static.flickr.com/6217/6258598287_86725b4d71.jpg


Shocks will be mounted inside the tub, behind the rear seat
http://farm7.static.flickr.com/6111/6258598239_5db452025d.jpg


Still need to do a little work on figuring out the fenders for the stretch...

Miraz
28-10-11, 07:15 AM
Shock mounts now in place
http://tapatalk.com/mu/3ba7e80a-9d1d-d83f.jpg


Checking for clearance at full bump - looks like we can run a 37" tyre and an 8" stretch with surprisingly little trimming - the upper white line is where the flare will mount up
http://tapatalk.com/mu/3ba7e80a-9d43-93ce.jpg

TRBN8R
28-10-11, 05:26 PM
That stretch takes ur departure angle to near 90.... Wow.... Ur Jeep will probably scare a Unimog to death...... Next step find some A++++++ tracks because everything will look too easy for ur Jeep.........

Miraz
28-10-11, 07:52 PM
It will come back a bit once the rear bar is in place, but the departure angle is a lot better.....new wheelbase is looking like 103" at ride height which should be a bit more stable on the steep stuff.

It will actually be a fair bit lower than it was, the idea is to make it look a lot more conservative than it is.

Miraz
13-11-11, 07:23 PM
Nearly there.....thanks to Hunty for the help this morning...

http://farm7.static.flickr.com/6032/6339117047_c54a94dac6_z.jpg

Steve F
13-11-11, 07:38 PM
Looks good, the rear flares look a little strange though, I'm guessing they are front turned around?

Cheers
Steve

Miraz
13-11-11, 08:08 PM
No - they are rear flares, just relocated a little

Steve F
13-11-11, 08:15 PM
Must just be the position of them then and having no bodywork behind them. Should be awesome offroad :)

Cheers
Steve

Hunty
13-11-11, 08:30 PM
Must just be the position of them then and having no bodywork behind them. Should be awesome offroad :)

Cheers
Steve
Can't wait to take Miraz to wheeny creek - & I can't describe here how insane this awesome JK feels - I got to experience a test emergency brake this morning - locked up all 4 x 37's - I thought my face was going to fall off !...... sweeeeeeet!

SKIZZI
13-11-11, 11:24 PM
Very nice :)

Are they the trailmods removable flares ?

aussiejk
14-11-11, 02:46 PM
Nearly there.....thanks to Hunty for the help this morning...

http://farm7.static.flickr.com/6032/6339117047_c54a94dac6_z.jpg

intresting.... how did you go about re-inforcing the rollbar mount looks like all the support is gone???

Miraz
14-11-11, 02:49 PM
intresting.... how did you go about re-inforcing the rollbar mount looks like all the support is gone???

Most of it is still there, but we're tying it down to the chassis rail via a rubber bush anyway...I'll need to do something to reinforce the rollbar in future, so it made sense to add a bit more structure whilst we were working on that area.

aussiejk
15-11-11, 12:05 PM
Ok sweet I've seen stock upper control arms moddifed to support roll bar off chassis

Miraz
16-06-13, 10:17 PM
http://img.tapatalk.com/d/13/06/16/page6a5u.jpg
http://img.tapatalk.com/d/13/06/16/tuse4uqy.jpg

SKIZZI
16-06-13, 10:46 PM
Like that first shot ;)

1stJeep
19-06-13, 07:49 PM
I really must put my JK in to 4low one of these days

reyzor
20-06-13, 08:35 AM
lets jsut tow the boat with it phil....... im sure you would need 4 low on the ramp?