PDA

View Full Version : My CJ6



Wooders
04-03-10, 02:29 PM
The CJ6 as it arrived in the driveway
http://www.aussiejeepimages.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=121110

Partly Gutted
http://www.aussiejeepimages.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=121128

Nearly gutted interior
http://www.aussiejeepimages.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=121131

Onto the exterior
http://www.aussiejeepimages.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=121113

This is where dissembly stopped and the "building" started
http://www.aussiejeepimages.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=121149

Wooders
07-04-10, 11:43 AM
A busy weekend wrenching in the driveway for Colin, Wolfe & myself - with a helping hand from ACJ & AussieCJ7 (thanks guys).
Sight milestone - Breifly got the engine beween the frame rails

Unfortunately had to pull it out again shortly afterwards to continue making the shackle mounts - but felt good to see the engine & diff clearance were ok. More updates later I guess ;D

NT-Boy
08-04-10, 12:07 AM
Nice Diff.....................very Nice.....


http://smileys.smileycentral.com/cat/36/36_18_4.gif (http://www.smileycentral.com/?partner=ZSzeb001_ZNxpt442YYAU)

http://www.smileycentral.com/sig.jsp?pc=ZSzeb095&pp=ZNxpt442YYAU (http://www.smileycentral.com/dl/index.jhtml?partner=ZSzeb095_ZNxpt442YYAU&utm_id=7923)

Steve F
09-04-10, 10:37 AM
About time we got to at least see these under a frame, should be good when there's some more :) Any expected deadline?

Cheers
Steve

Wooders
09-04-10, 03:20 PM
Nearly finished the shackle/leaf hangers. Should have them welded into place and the leafs in-place by the end of the weekend......IF all goes to plan (rarely happens).
REALLY want to have it finished LONG before the Jamboree - but much work to be done. At this stage target is end of June.

Wooders
12-04-10, 06:02 PM
NEARLY fonoshed the hangers over the weekend - just a few more braces to get burnt into place :)
Then I'll snap a fresh pic.
BTW foranyone interested in the full writeup I am doing - I have it Here (http://www.wooders.com.au/phpBB3/viewtopic.php?f=31&t=38) on our website.

Steve F
12-04-10, 07:16 PM
Looking good :) Looks like you're getting a lot of welding practice too.

Cheers
Steve

Wooders
12-04-10, 11:23 PM
The frame is now nearly twice the original weight - don't want to know how much of that is welding wire ;)
My welding isn't the worlds prettiest - but it should hold together :)

Wooders
23-04-10, 12:06 AM
Just a few more welds and I can start painting the chassis.
A quick pic of my BootFabed spring hangers
http://www.wooders.com.au/phpBB3/download/file.php?id=150

Wooders
03-05-10, 11:53 PM
Quick update - Nearly finished the frame - I am upto step 8 out off 11 to paint the frame ;)

Edit here's a pic after coating with POR-15.
http://www.aussiejeepimages.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=121191

Wooders
25-07-10, 10:18 PM
Not many updates lately - got some serious house renovations underway - dang it.
Have finished working on the frome for the time being.
http://www.wooders.com.au/phpBB3/download/file.php?id=160&sid=222806bb8602486313a1c989c60269e2
Now moving onto the body. Started by cutting a little hole to remove the rust spots
http://www.wooders.com.au/phpBB3/download/file.php?id=170&sid=222806bb8602486313a1c989c60269e2

Wooders
21-09-10, 05:23 PM
Got the wheels in the last shipment

Steve F
21-09-10, 05:32 PM
Cool, did you manage to get the tyres all mounted yet or are the still on the lounge room floor ;) and what about the XJ, lets see some pics of that with the flat flares and 35's :)

Cheers
Steve

Wooders
21-09-10, 06:12 PM
Still struggle with the tyres on the lounge room floor ;)
Volvo? Ok will see what I can dig up.

Wooders
02-11-13, 11:34 PM
Starting Apr 23, 2008
http://www.wooders.com.au/our_stuff/jeep_pics/xCJ6_Thumb.jpg.pagespeed.ic._-FipnjkDc.jpg

Inital plan was to fit an XJ engine/transmisson/transfer case. But due to the other plans I later changed my mind about this.

The basic plan (as of Nov2013) is:


AMC 360 + T18 transmission + NP208 transfer case.
Diffs would be the 404 Unimog diffs I've been hording for sometime. Still shopping for extra brake components and really need to be stripped down & referbished.
Tyres - 40x13.5R17
Wheels - 17x9 Internal (mechanical) bead locked. 6x205mm Bolt pattern with 6" Backspace. Custom made by Staworks in the US. Basically these are as close to factory spec as I could get.
Seating - MasterCraft F&R
Rollcage - got some good plans (I think). A MUST in the build plan but a fair way down the plan schedule.
Roof / Doors - Have Stock CJ6 Hardtop & doors - will probably keep them, but generally I want to run roofless (obviously).

Wooders
02-11-13, 11:52 PM
Tue Sep 01, 2009
http://www.wooders.com.au/phpBB3/download/file.php?id=34&sid=702e14f4b69cf0000365f087453d0364

Interior:
2589259025912592

Wooders
09-11-13, 01:14 AM
Stripping pics
2593259425952596259725982599

Dieselcon
09-11-13, 09:04 AM
I will really enjoy watching this build... Wow..... will look awesome.

Wooders
11-11-13, 07:45 AM
Sadly it will be a slow build.
There are a few things in front of it.

Sent from my GT-N7105T using Tapatalk

jetkev
13-11-13, 07:22 PM
How long will it take to finish it?

Sent from my GT-I9100T using Tapatalk

Wooders
13-11-13, 09:26 PM
Lets see its taken 4 years to get to this point.
I'd guess it'll be about another 4? Problem is I have some other big projects in the pipeline and precious little time. Also its at home and most tools are now at work.
So if if finish it in the next few years ill be happy.

Sent from my GT-N7105T using Tapatalk