View Full Version : Skizzi jk
http://184.72.239.143/mu/31b153a7-251e-2394.jpg
Been waiting since December for my bar to arrive
Installl was a pain as I did it alone.
Dieselcon
21-02-11, 07:25 PM
Wow.... Lookn hot'n nasty..
I expect to see some clips like this one soon..Mt Walker was a walk in the park for you...hehe
http://www.youtube.com/watch?v=xxV9T9QOYSg&feature=youtube_gdata_player
Thanks.
Yea absolutely :) take away the final step though :P
looks good..... what bar is that?
It's a "rock slide engineering" (RSE) shorty. They make a full version with foggys on either side but I wanted a short bar.
I like the square edges etc on this bar. Seems to tie in well with the lines of the Jks flares and my rear bar.
http://184.72.239.143/mu/31b8c1c0-15fe-f606.jpg
Here is a photo of the full bar
http://184.72.239.143/mu/012a6ae9-6d59-7eee.jpg
http://184.72.239.143/mu/012a6ae9-6e28-1cd8.jpg
Yea looks good parked infront of the local cafe... GET ME OFF ROAD :P
had a few pms asking for specs and mods etc in regards to my jeep so thought id write up a list of the mods i can remember
here goes...
SKIZZI CRD RUBICLONE
*2008 JK Wrangler Unlimited
*2.8 turbo Diesel
*colour Rescue Green
*AEV Snorkel
*4.5" of suspension lift with bilstein shocks
*adjustable control / trailing arms
*adjustable front track bar ( OEM rear)
*Poly performance drag link flip kit (very necessary and made the biggest difference to the ride together with the relocation brackets)
*poly performance trackbar relocation brackets (F + R )
*poly performance heavy duty ball joints
*jks quicker disconnects
*tough dog steering damper with relocation over the tie rod
*poly perfomance adjustable rear sway bar links
*1" Daystar bodylift
*17' M/T shiny wheels (future plans to powdercoat black
*37" M/T BAJA MTZ
*Smittybilt rear bar with tyre carrier with recovery points and shackles
*RSE short front bar with recovery points and shackles
*Fog lights
*Warn winch
*Front diff sleved and gusseted
*4.56 diff ratio
*ARB front and rear diff cover
*ARB front and rear air locker
*35 spline chromo rear axles
*ARB air compressor
*Aftrermarket front CV axels
*Front 1350 double cardan Drive Shaft
*Atlas 2 speed transfer case 4.3 ratio
*GME radio and arial
*Dual Batteries
*A/C converter
*i phone holder
*smittybilt xrc rock sliders
*HID headlight conversion kit
*drake hood hold down kit
Housing bought from DBOR as a swap
All other diff work done by Diff technics in kogarah
Everything else did myself.
Im pretty sure thats everything
See you all on the trail
Edit : HIDs are bright :) no one hi beams me coming the other way but the people driving in front of me MUST think I have my beams on. They are very bright
Also add to the list now 35 spline axles in the rear. The stock were not strong enough and failed.
Dieselcon
20-06-11, 10:12 PM
Greg....It's great seeing it in action... impressive most work done by you.
I like the name given to you by DK.....Grasshopper! Lol
It certainly is a beast!
Cheers Jose
a_boogs
27-06-11, 11:39 PM
Hey skizz... nice rig!!! got a mate just bought a 2011 JK and was wondering where/how you got your front bar and if it is ADR legal for oz.... cheers mate
Got it from quadratec. The ARB bar is the one your mate would want for ADR legality
a_boogs
29-06-11, 05:50 PM
Cheers mate will let him know
898
35 spline vs standard. This should do the job
http://tapatalk.com/mu/1b21cb86-aa18-3028.jpg
Latest update. Got the axles in Friday night. Also spent Saturday and most of this morning replacing the old 3" lift coils and 2" spacers with 4.5" lift coils. Installed the rock sliders and swapped the cable the winch for rope. Also installed the drake hood hold down kit.
If any of you are thinking about using the full traction lift for your rig don't do it. Bushes aren't up to the task. I replaced my rear bushes on the lower control arms and the new ones lasted one outing. Swapped the arms for Polly performance ones and they are still going strong.
Took the car in for a wheel alignment today and the front full traction lower control arm bushes are screwed. I'm not going to bother replacing them. Just going to get the Polly front lower control arms and be done with the FT ones.
That being said I've got a set of front and rear adjustable lower control arms in perfect condition ( both need new bushes on the side that mounts to the body) if anyone wants them both for $100. Cheers
If any of you are thinking about using the full traction lift for your rig don't do it. Bushes aren't up to the task. I replaced my rear bushes on the lower control arms and the new ones lasted one outing. Swapped the arms for Polly performance ones and they are still going strong.
Took the car in for a wheel alignment today and the front full traction lower control arm bushes are screwed. I'm not going to bother replacing them. Just going to get the Polly front lower control arms and be done with the FT ones.
That being said I've got a set of front and rear adjustable lower control arms in perfect condition ( both need new bushes on the side that mounts to the body) if anyone wants them both for $100. Cheers
What vehicle model/make do they fit?
They are off my 2008 Jk unlimited. 4 door. I should clarify they are not new. They have No damage just need new bushes on the sides that mount to the body
Can I ask - what make and model number are they - so I can see if they are compatible with my rig.
Thanks
They are from the full traction ultimate 3" lift kit. Sorry that's about all I know. They are a direct replacement for the Jk 4 door lower control arms. If the Jk 4 door lower control arms suit your car then these will. I don't think you can use these mate :(
Got defected last week :-/ (dont worry, already cleared ;) ) has convinced me to get some flares that cover the tyre. Ill have some pics up after the instal in the next couple of weeks :)
thats all he got you for? what flares are you going for?
I'll probably be pulling the dbor flat flares off mine if you are interested...
what are you gonna run geoff? the trailmods?
Going to have to make something custom to accommodate the wheel base stretch...
My order shipped today. Trailmods removable flares
Edit. Yep just tyres sticking out :). I was so happy lol
gees you got away pretty lucky....... im interested to see the trail mods....... they are 3 inches over standard where as the rest of the after market ones are about 2......
miraz i will call you about your flares.
poser shot
http://www.freeimagehosting.net/t/dd90d.jpg (http://www.freeimagehosting.net/dd90d)
no parking fool!
http://www.freeimagehosting.net/t/a087c.jpg (http://www.freeimagehosting.net/a087c)
rear shot
http://www.freeimagehosting.net/t/48f38.jpg (http://www.freeimagehosting.net/48f38)
last one
http://www.freeimagehosting.net/t/320a2.jpg (http://www.freeimagehosting.net/320a2)
ok very last one... a side shot
http://www.freeimagehosting.net/t/ab248.jpg (http://www.freeimagehosting.net/ab248)
testing out my new bumpstops and shocks thiis weekend :)
http://www.freeimagehosting.net/t/c3f1d.jpg (http://www.freeimagehosting.net/c3f1d)
http://www.freeimagehosting.net/t/4661d.jpg (http://www.freeimagehosting.net/4661d)
aussiejk
15-09-11, 12:24 PM
wow looks like you have very limited up travel with the bump stops...
even less than me running 60mm lift running enough bump stop for 37's
i reckon he'll have enough...... ;)
Compression is fine actually perfect. Flexed it last night at the local industrial area and on the rear there is about 1" up left. The only problem I've encountered is on the front extending. If I lift the chassis using the high lift I get full extension without a problem. But when I flexed it on a ramp the wider shocks make contact with the rails and won't extend fully. Thinking the only way to overcome it is to somehow modify it so the shocks sit further out an inch. Any other ideas??
you have the speed bumps mate, you'll be fine....
aussiejk
15-09-11, 08:38 PM
PPM do a shock relocation kit this should fix the problem
http://www.doubleblackoffroad.com/Products/PPM-Jeep-JK-Front-Lower-Shock-Mount-Bracket-Kit.aspx
thats exactly what i need :)
Shock relocation brackets arrived today. Got them in and did a quick test. Got about 3" more extension now.... Perfect :) thanks David
click the pic for the the full version. yes quality is not too good as its too dark for phone pics
http://www.freeimagehosting.net/t/0ef5d.jpg (http://www.freeimagehosting.net/0ef5d)
aussiejk
20-09-11, 04:32 PM
Damn that's some travel... I didn't really get to see you flex jeep that much on weekend.. That's impressive....
Well until I installed those brackets the top of the main part of the shock was stopping when it reached the top of the rail. It wasn't flexing right on the weekend anyway. Thanks for telling me about those brackets :)
aussiejk
21-09-11, 05:10 AM
Yeah no worries glad I could help out...
http://www.freeimagehosting.net/t/d532a.jpg (http://www.freeimagehosting.net/d532a)
spot the difference :)
aussiejk
24-09-11, 04:58 PM
you changed your number plates...
Flatfender
24-09-11, 06:54 PM
Yes but look below the numberplate as well.
Photoshoot tomorrow. They asked me to have the car spotless but seriously, who cleans their car spotless to take it to zigzag the next day. I think a quick hit with the garden hose should do it.
Was hoping for my flares to arrive in time but tracking suggests they are getting delivered tomorrow.... Oh well
They will give you (or mail) you a disk of all the photos/videos they take so upload some when you get them.
Takes at least 3 months to hit the selves so probably Xmas edition
They will give you (or mail) you a disk of all the photos/videos they take so upload some when you get them.
Takes at least 3 months to hit the selves so probably Xmas edition
yep, Jason said that it will be around december before its featured. I think i gotta wait for the car to be featured before they give me copies of the pix taken today. It was a good day. No difficult parts so I spent alot of time searching for bad lines for maximum flex :P
I got them straight away but I was working there at the time so that may of been why.
Looking forward to seeing them mate, your rig looks great
today i got busy installing the new removable flares, Ive got the front ones on but waiting for the tool i need to install the rear ones. First impressions... they are wide and cover the tyre. In terms of them being removable I knew they would be a pain to get on and off with the snorkel in the way but it will probably take about 10 mins to remove and install the flares instead of 2.
http://www.freeimagehosting.net/t/7285c.jpg (http://www.freeimagehosting.net/7285c)
Dieselcon
26-10-11, 07:18 PM
I like....
When ever you want to swap......I'll consider it. Lol
They look flatter, more room for flex? How much wider are the fenders?
Nice original Aussie JKU.
---
I am here: http://maps.google.com/maps?ll=-34.388423,150.876098
and some photos without flares. :) http://img.tapatalk.com/31b432af-9d37-1fca.jpghttp://img.tapatalk.com/31b432af-9d4c-ece5.jpghttp://img.tapatalk.com/31b432af-9d70-890d.jpg
Mounted the 60" hi lift as well :)
http://img.tapatalk.com/af21e4a5-8123-0f06.jpg
http://www.youtube.com/watch?v=hLrsAxNVb8g&feature=player_profilepage
here is a short vid Jose took yesterday with the new flares etc
thanks Jose
jeep_jk112
20-11-11, 03:46 PM
your truck is an absolute weapon mate! look forward to seeing it in action at some stage
What size arb fridge do you have in the back?? I'm looking to get a fridge with enough room for the food and grog, but don't want to take the whole boot up. yours fits nicely
Thanks. I'm still learning lots about how she likes to be driven with different obstacles. I feel I'm improving as a driver every trip :)
The ARB is a 47L. I find it to be the perfect size for me but I could have easily gone with the 60L if I needed it
Was always dissatisfied with the lighting in reverse so I finally found a solution... Tested it last night and I'm really happy with the difference :)
http://img.tapatalk.com/7a96f36b-99eb-6590.jpg
http://img.tapatalk.com/7a96f36b-9a0d-097c.jpg
http://img.tapatalk.com/7a96f36b-9a21-d0f4.jpg
aussiejk
25-11-11, 03:58 PM
nice spot for the light well hidden, would love to have mine there but my tyre hangs there stock tire carrier
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/404456_10150545047151991_533206990_9251725_7651496 _n.jpg
its been a while aye ;)
http://img.tapatalk.com/7ca91cf3-25ce-0e72.jpg
http://img.tapatalk.com/7ca91cf3-2621-2556.jpg
http://img.tapatalk.com/7ca91cf3-2633-6ec7.jpg
well there were a couple mistakes in the article but i cant complain... overall im pretty happy with it. Now im hoping they give me all the photos taken that day coz they had me there most of the day FFS
Everywhere I've gone it's sold out or they don't have it...! Devo...
Lol. Yea the news agent I went to only gets one copy of it.
I don't think it's a popular mag... Well I've only ever bought one issue ;)
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.