PDA

View Full Version : Building The Red October



Easy77
02-05-16, 11:14 PM
Getting ready for the build

https://farm5.staticflickr.com/4348/36936510315_5450c2c0bb_c.jpg

https://farm5.staticflickr.com/4379/36765580032_019be037ec_c.jpg

Dru
03-05-16, 07:11 AM
Not enough red!

richhenning
04-05-16, 10:39 AM
Red October, love it

Easy77
13-05-16, 08:38 PM
''' ''' ''' '''

Steve F
13-05-16, 09:11 PM
Looking good :)

Cheers
Steve

Easy77
14-05-16, 07:25 PM
. . . . . . . . . .

Dru
14-05-16, 09:40 PM
Very nice.

Easy77
21-05-16, 10:14 PM
. . . . . . . . . .

Elio S
24-05-16, 10:10 PM
Dusan if you don't mind me asking, how much were the ARB links?

Easy77
26-05-16, 08:20 PM
Dusan if you don't mind me asking, how much were the ARB links?

If I recall correctly, they were something like $190-$200 delivered from DBOR. DBOR sell these on their web as their own "DBOR-branded" disconnects, but they actually came as ARB branded product, even the user manual having ARB logo on it. Don't know what deals they run down there... nevertheless, good product - easy to use. They also have grease zerks on the lower pins so you can pump grease through the bottom pin right into the bushing.

Dru
29-05-16, 08:22 AM
Dusan, can I ask where you got the grille mesh from?

Steve F
29-05-16, 04:14 PM
Dusan, can I ask where you got the grille mesh from?
I got mine from Repco, it was an order in item but got there the next day.

Cheers
Steve

Easy77
30-05-16, 12:34 PM
Dusan, can I ask where you got the grille mesh from?

Got it from Supercheapauto. Also available in Autobarn, Repco, Ebay. It has the perfect width/height but you need to cut the length to size (use grinder, even garden pruners will do).

Easy77
13-06-16, 04:31 PM
= = = = = = = = = =

Easy77
13-06-16, 04:42 PM
. . . . . . . . . .

Easy77
13-06-16, 04:45 PM
. . . . . . . . . .

Easy77
13-06-16, 04:47 PM
. . . . . . . . . .

Easy77
13-06-16, 04:50 PM
. . . . . . . . . .

Easy77
13-06-16, 04:51 PM
] ] ] ] ] ] ] ] ] ]

Easy77
14-06-16, 07:08 PM
/ / / / / / / / / / / /

Easy77
20-06-16, 07:39 PM
..........

Easy77
21-06-16, 08:07 PM
………………………….

Easy77
22-06-16, 07:57 PM
……. . . . . .

Easy77
22-06-16, 08:00 PM
-----------

Easy77
04-07-16, 06:09 PM
- - - - - - - - - - - - - - -

TRBN8R
05-07-16, 06:56 AM
Hi Dusan, I am not sure where the transmission and transfer case breathers on the 3.6 is.... but pls check that as well. Mine on 3.8 was too low and I ended up with strawberry milk shake in my transmission at Nolan's Brook..

Sent from my Nexus 6P using Tapatalk

Easy77
19-04-17, 10:47 PM
Thanks Meni, I have eventually extended the transfer and transmission breather too. From the factory it is a combined tube for both and it sits on top of the engine under the plastic "jeep" cover. I extended it with a fuel hose and finished with a fuel filter too, just like the front diff.

Easy77
19-04-17, 10:51 PM
- - - - - - - - - - - -

Easy77
19-04-17, 10:57 PM
. . . . . . . . . . . . .

Easy77
20-04-17, 10:12 PM
+ + + + + + + + + + + +

Easy77
30-08-17, 11:11 PM
- - - - - - - - - - - -

Easy77
31-08-17, 08:45 PM
. . . . . . . . . . . . .

Easy77
31-08-17, 09:08 PM
. . . . . . . . . . . .

richhenning
31-08-17, 09:15 PM
Been a busy lad. Nice work, looking good.


Sent from my iPad using Tapatalk

Easy77
01-09-17, 07:53 PM
' ' ' ' ' ' ' ' ' ' ' ' ' '

Easy77
01-09-17, 07:59 PM
. . . . . . . . . . . .

Easy77
01-09-17, 08:08 PM
. . . . . . . . . . . .

Easy77
01-09-17, 08:15 PM
0 0 0 0 0 0 0 0 0 0 0 0 0

Easy77
01-09-17, 08:20 PM
. . . . . . . . . . . . . .

Easy77
01-09-17, 08:24 PM
, , , , , , , , , , , , , ,

Easy77
03-09-17, 03:09 PM
,,, ,,, ,,, ,,,

Easy77
03-09-17, 03:13 PM
; ; ; ; ; ; ; ; ; ; ;