Well done!
37s look like 40s on the 2 door
Well done!
37s look like 40s on the 2 door
I rekon the 37s look small with the amount of lift or maybe also the flares that make it look big too
Back from Cape York, and back to finishing the build up...now for the rear end stretch, the 14bolt is going back 8" which should give me a 104" wheel base
New axle position at ride height
Wheel position at ride height
Axle position at full stuff
Shocks will be mounted inside the tub, behind the rear seat
Still need to do a little work on figuring out the fenders for the stretch...
Shock mounts now in place
Checking for clearance at full bump - looks like we can run a 37" tyre and an 8" stretch with surprisingly little trimming - the upper white line is where the flare will mount up
That stretch takes ur departure angle to near 90.... Wow.... Ur Jeep will probably scare a Unimog to death...... Next step find some A++++++ tracks because everything will look too easy for ur Jeep.........
It will come back a bit once the rear bar is in place, but the departure angle is a lot better.....new wheelbase is looking like 103" at ride height which should be a bit more stable on the steep stuff.
It will actually be a fair bit lower than it was, the idea is to make it look a lot more conservative than it is.
Last edited by Miraz; 28-10-11 at 08:57 PM.
Nearly there.....thanks to Hunty for the help this morning...
Looks good, the rear flares look a little strange though, I'm guessing they are front turned around?
Cheers
Steve
Public Officer - Member #076
No - they are rear flares, just relocated a little
Must just be the position of them then and having no bodywork behind them. Should be awesome offroad
Cheers
Steve
Public Officer - Member #076
Bookmarks