Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: My CJ6

  1. #1

    Default My CJ6 Project

    The CJ6 as it arrived in the driveway


    Partly Gutted


    Nearly gutted interior


    Onto the exterior


    This is where dissembly stopped and the "building" started
    Last edited by Wooders; 04-05-15 at 05:15 PM. Reason: Update due to initial thread issues.

  2. #2

    Default

    A busy weekend wrenching in the driveway for Colin, Wolfe & myself - with a helping hand from ACJ & AussieCJ7 (thanks guys).
    Sight milestone - Breifly got the engine beween the frame rails

    Unfortunately had to pull it out again shortly afterwards to continue making the shackle mounts - but felt good to see the engine & diff clearance were ok. More updates later I guess
    Last edited by Wooders; 04-05-15 at 05:16 PM.

  3. #3

    Default

    Nice Diff.....................very Nice.....




    Last edited by NT-Boy; 08-04-10 at 12:53 AM.

  4. #4
    Public Officer Steve F's Avatar
    Join Date
    Aug 2004
    Age
    54
    Posts
    5,500

    Default

    About time we got to at least see these under a frame, should be good when there's some more Any expected deadline?

    Cheers
    Steve
    Public Officer - Member #076

  5. #5

    Default

    Nearly finished the shackle/leaf hangers. Should have them welded into place and the leafs in-place by the end of the weekend......IF all goes to plan (rarely happens).
    REALLY want to have it finished LONG before the Jamboree - but much work to be done. At this stage target is end of June.

  6. #6

    Default

    NEARLY fonoshed the hangers over the weekend - just a few more braces to get burnt into place
    Then I'll snap a fresh pic.
    BTW foranyone interested in the full writeup I am doing - I have it Here on our website.

  7. #7
    Public Officer Steve F's Avatar
    Join Date
    Aug 2004
    Age
    54
    Posts
    5,500

    Default

    Looking good Looks like you're getting a lot of welding practice too.

    Cheers
    Steve
    Public Officer - Member #076

  8. #8

    Default

    The frame is now nearly twice the original weight - don't want to know how much of that is welding wire
    My welding isn't the worlds prettiest - but it should hold together

  9. #9

    Default

    Just a few more welds and I can start painting the chassis.
    A quick pic of my BootFabed spring hangers

  10. #10

    Default

    Quick update - Nearly finished the frame - I am upto step 8 out off 11 to paint the frame

    Edit here's a pic after coating with POR-15.
    Last edited by Wooders; 04-05-15 at 05:14 PM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •