Results 1 to 6 of 6

Thread: Replacement of Font Diff on ZJ

  1. #1
    Club Member Hunno's Avatar
    Join Date
    Aug 2009
    Location
    Narara
    Posts
    1,977

    Default Replacement of Font Diff on ZJ

    Starting to think about replacing the diffs, front 1st as the right hand side CV is & has been clicking since before the lake Lyell trip. Now I have got a relly bad shake coming from the left.
    Steve T has suggested previously about changing to HP44's, which would allow me to run a bigger lift also.
    My questions
    1) What models are they on?
    2) Is it a straight swap or do I have to change mounts or something?
    98 ZJ Grand Cherokee(Lightly Modded), 84 CJ8, 74 CJ6,
    Lord Help me I'm in to Jeep!!!!

  2. #2
    Visitor
    Join Date
    Nov 2008
    Location
    Grenfell
    Age
    42
    Posts
    556

    Default

    A HP30 out of an XJ is readily available and I believe a bolt in swap to a ZJ. You also get rid of the CV's in exchange for uni's, and near on the strength of a stock D44 (low pinion) due to the reverse rotation. I've heard plenty of stories of 35" rubber on even stock HP30's with no problems (as opposed to almost any D35, which will twist up like rope in the mere presence of a 35" tyre )

  3. #3
    Public Officer Steve F's Avatar
    Join Date
    Aug 2004
    Age
    54
    Posts
    5,500

    Default

    Yep, I'd go with the D30 from an XJ to get the High pinion. The D30 can be built up pretty strong and will cope with 35's if driven with respect. Wooders had 36's on his and gave it hell at tuff truck (A few years ago now) and I think that was the slightly weaker low pinion TJ diff. I have a D44 I'll start building up after Easter for the rear of the XJ but I'll keep the D30 (regeared etc though) and I plan to run either 33's or 35's.

    Cheers
    Steve
    Public Officer - Member #076

  4. #4
    Club Member Hunno's Avatar
    Join Date
    Aug 2009
    Location
    Narara
    Posts
    1,977

    Default

    Ok so I can get a HP30 from an XJ. Will the gearing match to what I need? As for regearing that will have to wait as I need to clear a couple of bills first.
    98 ZJ Grand Cherokee(Lightly Modded), 84 CJ8, 74 CJ6,
    Lord Help me I'm in to Jeep!!!!

  5. #5
    Visitor
    Join Date
    Nov 2008
    Location
    Grenfell
    Age
    42
    Posts
    556

    Default

    Quote Originally Posted by Hunno View Post
    Ok so I can get a HP30 from an XJ. Will the gearing match to what I need? As for regearing that will have to wait as I need to clear a couple of bills first.
    Stock petrol XJ gearing is 3.55:1, I think ZJ may be lower though?

  6. #6
    Public Officer Steve F's Avatar
    Join Date
    Aug 2004
    Age
    54
    Posts
    5,500

    Default

    I think the ZJ gearing is 3.73 and the XJ is typically 3.55 or 3.73 if you get one from a diesel, also look around for 3.73's on Ausjeep as a few have regeared and may have them lying around. Also do you have ABS, if you do then you'll need to swap the ZJ knuckles on to the XJ front end to keep it.

    Cheers
    Steve
    Public Officer - Member #076

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •