Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 34

Thread: 97 TJ Project

  1. #11
    Visitor
    Join Date
    Mar 2012
    Location
    Kings Langley, Sydney
    Posts
    507

    Default

    2" lift kit Tough Dog Springs, Rancho RS9000XL Shocks
    SBPhoto (9 of 1).jpg
    Even after a day out on the trails and in the mud it still hasn't take the shine of that chrome

  2. #12

    Default

    Get a good set of 33x15.50 tires for that if your going with a 2" lift heres a photo of mine when i got it and what it looks like now1.jpg16.jpg

  3. #13

    Default

    is that really a 15.5 tire? are you sure its not 12.5?

  4. #14
    Visitor
    Join Date
    Mar 2012
    Location
    Kings Langley, Sydney
    Posts
    507

    Default

    At the moment I have just put new 265/65/17 Kumho AT on there.

    I brought it with the 17" on there and will eventually go back to 15'' rims with big tyres.

    As i have only had the TJ for a month and used all the budget with a GME radio and 2.5'' lift the other mods have to wait till after the holiday

    Mods on the list

    New front & Rear bars
    Winch
    Diff Lockers
    31 or 33'' tyres
    SYE

    but really need a holiday

  5. #15

    Default

    factor in a ratio change when you get your lockers installed....... works out cheaper in the long run....

    if it was me id be doing the SYE first, then the bar work, tires/ lockers/ratios, then the winch........

    enjoy doing it though.... its a slippery slope

  6. #16

    Default

    for once i agree with Rey. factor in ratios when the diffs are open for lockers, 4:56 would be good for 33 and still ok for 35 if you think you might get to that stage one day.

  7. #17
    Visitor
    Join Date
    Mar 2012
    Location
    Kings Langley, Sydney
    Posts
    507

    Default

    Yes SYE and bar work is coming first

    Then Lockers & Winch

    Its a fun process doing it myself in my garage, Good learning curve

  8. #18

    Default

    you always agree with me vince...... dont even pretend...

    with the lockers and ratios, if you arent proficient at it, id get someone to do it........ everythign else is pretty simple though

  9. #19

    Default

    Sorry there 12.50 its a mistake haha i do have 33x15.50''s claws though but they are not going on that jeep due to the small axles

  10. #20
    Visitor
    Join Date
    Mar 2012
    Location
    Kings Langley, Sydney
    Posts
    507

    Default

    So i have done a little bit of work on my TJ. ( The chrome is going)

    New Smittybilt XRC front bar and Smittlybilt rock sliders
    photo.jpg©SBPHOTO12.jpg

    The Mods so far
    Smittybilt XRC front bar
    Smittlybilt rock sliders
    2.5" lift kit Tough Dog Springs, Rancho RS9000XL Shocks
    GME TX3100 80 channel UHF
    Custom made box/ draw system in the back, Home Made
    New Khumo AT Tyres

    hoping to get a few more things done before Jambo

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •