Results 1 to 5 of 5

Thread: 98 jeep grand cherokee limited 4.0 Stock

  1. #1
    Visitor
    Join Date
    Apr 2013
    Location
    Bardwell valley
    Posts
    39

    Default 98 jeep grand cherokee limited 4.0 Stock

    Hey guy new to the site and 4wd.

    Wondering anyone who has this model any common problems besides the random stalling already fixing that with a new crank angle sensor ( hopefully that's the fix) its at a trusted auto elec, also sorting out rough idling in the morning haven't found that problem yet so any suggestions would be great,

    any thoughts on upgrades and set ups for the rig would be great, main uses will be sand dunes, and soft 4wd a bit of mud water etc no hardcore stuff yet
    Been looking at a arb bull bar that can house a winch, and adding a front tow points for the time being as I'm a apprentice.

    thanks for reading and advice in advance cheers guys
    Mitch

  2. #2

    Default

    Mitch
    Welcome
    the TPS should fix your problems as I had similar problem with my 01 limited V8. Check www.rockauto.com
    ARB are the only one that make a winch bar.
    A basic quality 2" lift and good tyres (max 31-31.5") will do wonders. A haines tow bar will cover you for rear recovery and the ARB has recovery points in front. But use a equalizer strap for front to even out when doing a heavy recovery
    If youhave money left get a set of rock sliders to protect your sills
    Good luck
    Steve

  3. #3
    Club Member Hunno's Avatar
    Join Date
    Aug 2009
    Location
    Narara
    Posts
    1,977

    Default

    Quote Originally Posted by SteveC View Post

    ARB are the only one that make a winch bar.
    Steve
    No there not, give Wooders a call as per my pm.

    Hunno
    98 ZJ Grand Cherokee(Lightly Modded), 84 CJ8, 74 CJ6,
    Lord Help me I'm in to Jeep!!!!

  4. #4
    Visitor
    Join Date
    Apr 2013
    Location
    Bardwell valley
    Posts
    39

    Default

    Thanks for the speedy replys, I do have a set of rock sliders/steps. Ill be getting a ridge rider rated at 4.3 tonnes I'm pretty sure, the recovery points for the front I still need to work out, also are these model jeep known to have a solid engine as my is at 270000, but engine bay seem very clean as well as seals only one I need to replace is the oil pan seal


    cheers Mitch

  5. #5
    Visitor
    Join Date
    Apr 2013
    Location
    Bardwell valley
    Posts
    39

    Default

    Quote Originally Posted by Hunno View Post
    No there not, give Wooders a call as per my pm.

    Hunno
    Had a look at the web page pretty handy that he specialises in jeeps cheers mate

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •