Fitting driving lights
Hi guys I am a new member,
I want to fit a set of driving lights to my 2013 GC but because the standard HID's have a 5amp relay it has become a bit of a problem.
Can anybody please help me with some suggestions to overcome this.
Sent from my iPad using Tapatalk
Fitting driving lights
Why problem? Fitting extra lights is independent from car except the trigger from high beam to your relay. Driving lights via Relay gets power from battery directly.
Sent from my iPad using Tapatalk
Apparently the 5volt relay on high beam in not enough to trigger the 12volt relay that you need for the driving lights.
Sent from my iPad using Tapatalk
Sounds hard to believe. I have had mine set up for years to a 30amp relay. no issue. Splice into the hi beam wire directly behind left head light and all should be fine. The relay needs very little to trigger.
Sent from my iPad using Tapatalk
A good Auto-Electrician Will solve All your Problems.
This might work, 5v switching 12v, use the 12v output to switch a 30A 12v relay to power the lights
https://www.sparkfun.com/products/100
Vheers
Steve
Public Officer - Member #076
Thank you all very much it has had the auto elec baffled. The 5 volt relay to the HID's threw him a bit.
Sent from my iPad using Tapatalk
RUN!Originally Posted by thsurfer
Go see someone else... as Dave's said. A GOOD Auto sparky.
Thank you to Steve F your link was spot on because standard HIDs on 2013 GC run a 5v relay the only way it can be done is the way you suggested, thank you again as helped greatly.
thsurfer.
Sent from my iPad using Tapatalk
Posting Permissions
Bookmarks