-
Club Member
Since yours is stuck in the locked position, you’re likely better off than we were, and a good cleaning might do the trick.
Ours shorted and melted a big hole around the power pins, and caused a matching blemish on the mounting harness.
BTW it’s a 17mm socket to remove the sway bar from the frame, and two 18mm wrenches to remove the sway bar’s links near the wheels.
It’s so nice to be driving with a working sway bar again!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks