Results 1 to 3 of 3

Thread: changing diff ratio

  1. #1
    Club Member snoik's Avatar
    Join Date
    Apr 2010
    Location
    Kandos
    Posts
    128

    Default changing diff ratio

    after some advise, I'm changing the diff ratio's on my 2010JK from 3.21 to 4.11, what needs to be done to the speedo so it reads correct??

    regards
    Andrew

  2. #2
    Club Member Mohawk's Avatar
    Join Date
    Jan 2016
    Location
    London
    Posts
    174

    Default

    Hi Andrew,

    An AEV ProCal will do the trick. Mine was about $230 from Double Black Off-road. Many other tuning devices will also perform the calibration, but may be significantly more expensive.

    Using the ProCal is dead simple. It'll only take a few minutes to set the switches to the desired setting, plug it into your Jeep's OBD2 connector below the steering wheel, and turn the key to power the electrical accessories but not start the Jeep. The Jeep will honk when the change has been successfully applied.

    Let us know how it goes.

    Cheers,
    Nick


    Sent from my iPhone using Tapatalk

  3. #3
    Club Member snoik's Avatar
    Join Date
    Apr 2010
    Location
    Kandos
    Posts
    128

    Default

    Thanks Nick,

    It might be a little while before I do the change, doing extensions on my house (2 x extra bedrooms), the house takes priority at the moment.
    I have all the parts to do the change(gears/e-locker)just need the time and money to get them installed once the extensions are done.

    regards
    Andrew

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •