-
Club Member
finally got the new bushes(correct size this time) but in the meantime while waiting for the bushes I replaced all 4 ball joints with heavy duty Synergy units, (the bottom 2 were really loose?) also replaced the drag link with a heavy duty Synergy unit, and steering damper from teraflex with relocation bolt which replaces the bottom track bar bolt.
All seems OK with no more death wobble, just a shake like wheel balance, so getting the tyres checked will be next, but it's definitely better.
Andrew
-
Club Member
finally got a wheel alignment, and there's no adjustment for caster, the steering is really sensitive/ touchy (flighty?)looking on the net, adjustable control arms seem to be the go, can I get away with only installing lower front adjustable control arms, or will I need to replace all top as well.
I have replaced the steering linkages with Synergy units so was looking at the Synergy control arms from SBR.
any advice
Andrew
-
Club Member
Bottoms only should be fine if your lift is south of 4”.
Sent from my iPhone using Tapatalk
-
Club Member
I was told it has a 3.5" lift, so bottoms only will work then?
-
Club Member
Yep [emoji106]
Sent from my iPhone using Tapatalk
-
Club Member
Only really need adjustable uppers and lowers to dial in wheel base at taller lifts. Adjustable lowers (or uppers) to manage caster is all that is really needed. I prefer lowers due to ease of adjustment, but others will suggest adjustable uppers are a better choice. Either way, you will be able to adjust the caster with uppers or lowers.
Sent from my iPhone using Tapatalk
-
Club Member
-
Club Member
Finally put the adjustable lower control arms on, and WOW, what a difference, should nave done it sooner.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks