STANDARD 2' OR 2 1/2' LIFT.

Available from pretty much all Jeep mod manufacturers but the big three are probably AEV (American Expedition Vehicles), Terraflex, Synergy.

What these kits do is try to keep the cost down by lifting as much as they can withOUT needing adjustable everything. Adjustable stuff is expensive to manufacture. Typically it invloves beefed up brackets that are pre-drilled to ensure that the geometry correction is sorted out automatically. There is some adjustment eg the track rod but on the whole the kit should be "set and forget".

As it so happens, these kits will let you install 33" on the 2' lift so that you are at the legal limit and do not need to get certification and engineering in NSW.

Another advantage is that, other than bolting it all together, there is nothing to adjust, no fine tuning knowledge required - bolt it together and go wheeling!

You can see why this lift system is considered something of a "go to" at the SJC. Very effective, sensible, and with an experienced driver a huge step up from stock. And the Jeep was good stock anyway!

Highly recommended.